Tomatoville® Gardening Forums


Notices

Have a great invention to help with gardening? Are you the self-reliant type that prefers Building It Yourself vs. buying it? Share and discuss your ideas and projects with other members.

Reply
 
Thread Tools Display Modes
Old June 19, 2017   #226
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 413
Default

Thanks for the pictures, they made me younger. The second is rather puzzling. I hope you managed to squirt some oil on the drill and at the bottom of the hole when you took it out to clear the shavings. The lathe will soon be amortized !
loulac is offline   Reply With Quote
Old June 19, 2017   #227
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Bastrop Texas Lost Pines Forest.
Posts: 29,756
Default

Quote:
Originally Posted by loulac View Post
Thanks for the pictures, they made me younger. The second is rather puzzling. I hope you managed to squirt some oil on the drill and at the bottom of the hole when you took it out to clear the shavings. The lathe will soon be amortized !
The first bolt I had spinning too fast and slow it down this is the bolt in the pictuer.
Yes the hole goes all the way through and I use a lot of oil to clear out shavings.
I cant count how many times I took the drill and the tap out to oil and clear shavings.
The tap for sure or you will just end up with a broken tap work ruined.
These taps get real hot just by tapping by hand if you leave them in hot they will get stuck so you have to take them out so they and the work can cool off.
I usually make about 1/2 turn and back up to break chips so it takes a long time.
If a person is in a hurry and wants to get it done fast and not the kind of person to take their time they dont need to be doing it.
Taps are so hard they are like glass almost.
When a die explodes it sounds like a small gun going off.
I always wear safety glasses around this stuff.

Worth
__________________
Home of Cactus Flats Botanical Gardens.
Worth1 is offline   Reply With Quote
Old July 6, 2017   #228
Fusion_power
Tomatovillian™
 
Fusion_power's Avatar
 
Join Date: Feb 2006
Location: Alabama
Posts: 2,017
Default

I don't have a lathe, but I do have a set of taps and dies. Some 35 years ago, Sears sold a decent set of taps and dies under the Craftsman label. I have both metric and standard with about 110 pieces total. They have come in handy many times over the years.

I am planning to build a workshop. Doing my woodworking and shop work in the greenhouse only goes so far. I need a place big enough to set up 3 tablesaws, a radial arm saw, router table, sander, and a few other miscellaneous items.
Fusion_power is offline   Reply With Quote
Old July 6, 2017   #229
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Bastrop Texas Lost Pines Forest.
Posts: 29,756
Default

If you ever do decide to buy a lathe stay away from old south bends and such.
TheyDer.e antiques best left for the museum.
Many are wore out to the point of if not being practical to fix.
You wont find these unfixable problems until you get it home.
What I need is some way to cut steel besides a cut off wheel on a right angle grinder.
Worth
__________________
Home of Cactus Flats Botanical Gardens.
Worth1 is offline   Reply With Quote
Old July 7, 2017   #230
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 413
Default

Quote:
Originally Posted by Worth1 View Post
What I need is some way to cut steel besides a cut off wheel on a right angle grinder.Worth
As I don’t master technical English at all I’m not sure I can make myself perfectly understood.

4 families of equipment come to my mind :
- disk of HSS steel or with carbide teeth / milling cutter. HSS steel cuts more cleanly and can be sharpened till its diameter becomes too small. Lubrication is highly recommended. Must be used with a stand, never with a common grinder, the speed is much too high.
-band saw. Works slowly but high precision. Lubrication and automatic progression highly recommended not to break teeth.
- reciprocating saw. Less fragile than disks. Can cut thick pieces of steel. Automatic progression highly recommended not to break teeth

Second hand equipment is a good solution, I suppose opportunities ca be found from time to time…
loulac is offline   Reply With Quote
Old 2 Weeks Ago   #231
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Bastrop Texas Lost Pines Forest.
Posts: 29,756
Default

Here is an example of the quality of work we are getting in Texas from our imported labor.
Worth
IMG_20170729_39705.jpg
__________________
Home of Cactus Flats Botanical Gardens.
Worth1 is offline   Reply With Quote
Old 2 Weeks Ago   #232
JRinPA
Tomatovillian™
 
Join Date: Jul 2013
Location: SE PA
Posts: 287
Default

Behold, the famed Guadalajaran lap joint.
JRinPA is offline   Reply With Quote
Old 2 Weeks Ago   #233
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 413
Default

Quote:
Originally Posted by Worth1 View Post
Here is an example of the quality of work we are getting in Texas from our imported labor.
Worth
Attachment 75846
This (these) guy(s) deserve(s) to be shot right on the place. This is what happens when you pick up your workers on the market place or when they ring your bell.
loulac is offline   Reply With Quote
Old 2 Weeks Ago   #234
AlittleSalt
Tomatovillian™
 
AlittleSalt's Avatar
 
Join Date: May 2014
Location: Zone 8A Texas Heat Zone 9
Posts: 9,372
Default

Take that Estwing 20 oz. hammer and slam the 16 penny nail down. That's old school - it's still practiced today. F all the BS that people pretend to do today.
__________________
Salt, AlittleSalt, Robert
AlittleSalt is offline   Reply With Quote
Old 2 Weeks Ago   #235
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Bastrop Texas Lost Pines Forest.
Posts: 29,756
Default

I cant count how many times I have seen nails sticking out of the wood ready to hurt someone on the site.
If OSHA were to show up they would have a field day.
If they were to take over there wouldn't be anything built in any amount of reasonable time either.
No way in hell am I going anywhere near an imported worker kid with a 16 penny nail gun.
Worth
__________________
Home of Cactus Flats Botanical Gardens.
Worth1 is offline   Reply With Quote
Old 2 Weeks Ago   #236
dmforcier
Tomatovillian™
 
dmforcier's Avatar
 
Join Date: Apr 2016
Location: Dallas, TX
Posts: 3,220
Default

Quote:
Originally Posted by JRinPA View Post
Behold, the famed Guadalajaran lap joint.
That one cracked me up pretty good. <still chuckling>


Dennis
__________________


Stupidity got us into this mess. Why can't it get us out?
- Will Rogers


dmforcier is offline   Reply With Quote
Old 2 Weeks Ago   #237
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Bastrop Texas Lost Pines Forest.
Posts: 29,756
Default

Count the safety violations in this picture.
Worth
IMG_20170801_21972.jpg
__________________
Home of Cactus Flats Botanical Gardens.
Worth1 is offline   Reply With Quote
Old 2 Weeks Ago   #238
dmforcier
Tomatovillian™
 
dmforcier's Avatar
 
Join Date: Apr 2016
Location: Dallas, TX
Posts: 3,220
Default

I see 1) parking too close to the hydrant; 2) three-story ladder?

Also looks like unprotected electric termination this side of the hydrant?
__________________


Stupidity got us into this mess. Why can't it get us out?
- Will Rogers


dmforcier is offline   Reply With Quote
Old 2 Weeks Ago   #239
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Bastrop Texas Lost Pines Forest.
Posts: 29,756
Default

Forget the fire hydrant it is new constitution and the curb has to be marked no parking.
Many fall hazards look at all the buildings.
__________________
Home of Cactus Flats Botanical Gardens.
Worth1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:00 PM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2017 Commerce Holdings, LLC ★