Tomatoville® Gardening Forums


Notices

Have a great invention to help with gardening? Are you the self-reliant type that prefers Building It Yourself vs. buying it? Share and discuss your ideas and projects with other members.

Reply
 
Thread Tools Display Modes
Old March 12, 2016   #151
JRinPA
Tomatovillian™
 
Join Date: Jul 2013
Location: SE PA
Posts: 961
Default

Speaking of oil, I read about some people running olive oil 16:1 in their old outboards. Personally, I think the smell would make me too hungry to want to fish. At minimum I would have to pack a hoagie in the cooler.
JRinPA is offline   Reply With Quote
Old March 13, 2016   #152
luigiwu
Tomatovillian™
 
Join Date: Jun 2013
Location: ny
Posts: 1,219
Default

So castor oil from the drugstore is okay, right? or this stuff, see below:
And the tips of the pruner are covered now with black stuff, sooty looking. Should I go over it with some steel wool before putting the mineral oil on it?
__________________
Subirrigated Container gardening (RGGS) in NY, Zone 7!

Last edited by luigiwu; March 13, 2016 at 01:42 PM.
luigiwu is offline   Reply With Quote
Old March 13, 2016   #153
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by luigiwu View Post
So castor oil from the drugstore is okay, right? or this stuff, see below:
And the tips of the pruner are covered now with black stuff, sooty looking. Should I go over it with some steel wool before putting the mineral oil on it?
Nope the mineral oil ans yes just go over them with some steel wool.

Worth
Worth1 is offline   Reply With Quote
Old March 20, 2016   #154
SamiKihano
Tomatovillian™
 
Join Date: Feb 2016
Location: oregon
Posts: 27
Default

I like to make walnut handles for most of my indoor tools, Pacific Madrone for skinning, and ash for anything I make such as an axe or hammer handle.
Lovely work by the way. I'll have to figure out how to upload my droid pictures, you may enjoy my work with Cascadia vine maple handles and tobacco pipes. The wood grows so slowly that every year appears as a millimeter thick growth ring. We think the piece just big enough for my pipe was roughly 50 years old!

Last edited by SamiKihano; March 20, 2016 at 04:31 PM. Reason: Fixing an auto correct error
SamiKihano is offline   Reply With Quote
Old March 26, 2016   #155
bower
Tomatovillian™
 
bower's Avatar
 
Join Date: Feb 2012
Location: Newfoundland, Canada
Posts: 6,793
Default

Quote:
Originally Posted by JRinPA View Post
Speaking of oil, I read about some people running olive oil 16:1 in their old outboards. Personally, I think the smell would make me too hungry to want to fish. At minimum I would have to pack a hoagie in the cooler.
Did you ever notice that green birch when it's cut and split smells exactly like EVOO? Pretty powerful aroma and makes it a pleasure to stack...
Not entirely off topic someone may come on and tell us how they season the splits to make handles.
bower is offline   Reply With Quote
Old March 26, 2016   #156
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

No worries talk about what you want to.

Worth
Worth1 is offline   Reply With Quote
Old April 23, 2016   #157
bower
Tomatovillian™
 
bower's Avatar
 
Join Date: Feb 2012
Location: Newfoundland, Canada
Posts: 6,793
Default

So it happens I found that old axe we used to clear stumps and indeed there's a maker's mark on it: HB Made in Sweden. I had looked at the favourite hatchet and didn't see a mark, but when I looked again it is the same maker. Really nice axes, very well balanced and good blades.
My Dad must have sharpened this up after the last time we used it, because the blade looks just too good. The handle is another story, you can see the awful shape it's in and it is not the original, I don't know who shaved it up like that but what a contrast to you guys' clean work. Here it is, cobwebs and all.
Attached Images
File Type: jpg HB-axe.JPG (132.1 KB, 75 views)
bower is offline   Reply With Quote
Old July 5, 2016   #158
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by bower View Post
So it happens I found that old axe we used to clear stumps and indeed there's a maker's mark on it: HB Made in Sweden. I had looked at the favourite hatchet and didn't see a mark, but when I looked again it is the same maker. Really nice axes, very well balanced and good blades.
My Dad must have sharpened this up after the last time we used it, because the blade looks just too good. The handle is another story, you can see the awful shape it's in and it is not the original, I don't know who shaved it up like that but what a contrast to you guys' clean work. Here it is, cobwebs and all.

Bower the shaving on the handle is from whacking it on the other end to get it to tighten up so it want fly off.
That is a good product and in need of a new handle.
Worth
Worth1 is offline   Reply With Quote
Old August 24, 2016   #159
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

This one goes in the handle section I guess.
It is made from a mesquite limb I picked up off the ground, a brass valve stem I got from the junk years ago and the remnants of a cheap pellet rifle barrel.
I needed a brass hammer so I just made the thing using both lathes and my drill press.

While making it I was trying to figure out how to make the handle stay on.
Glue?
A pin?
Press fit?
A nut in the back?
Thread it you idiot.
Worth
20160824_164112.jpg

20160824_164338.jpg
Worth1 is offline   Reply With Quote
Old August 24, 2016   #160
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

It didn't look completed so I decided to try my luck at copper spinning.
Now it is completed.

Worth

20160824_194125c.jpg

20160824_194039.jpg
Worth1 is offline   Reply With Quote
Old August 24, 2016   #161
AlittleSalt
BANNED FOR LIFE
 
AlittleSalt's Avatar
 
Join Date: May 2014
Posts: 13,333
Default

Is it possible to round off the wooden area where in meets the copper? Once in a blue moon - you might need to choke up on the hammer and it might be more comfortable to the grip, but then again - it may work better as a finger grip point that your ring finger catches the way it is - giving it a steadier grip.

Last edited by AlittleSalt; August 24, 2016 at 11:11 PM.
AlittleSalt is offline   Reply With Quote
Old August 24, 2016   #162
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by AlittleSalt View Post
Is it possible to round off the wooden area where in meets the copper? Once in a blue moon - you might need to choke up on the hammer and it might be more comfortable to the grip, but then again - it may work better as a finger grip point that your ring finger catches the way it is - giving it a steadier grip.

Salt I use the bottom three fingers to swing the hammer as the top of the handle pivots on my index finger and thumb without moving my arm or wrist.
Like you would a chasers hammer.
This is only done in small taps to move things around a thousandth of an inch or a fraction of a degree.
That is why the knob is on the bottom.
It is made out of brass so it wont dent my lathe or other equipment.
Worth
Worth1 is offline   Reply With Quote
Old August 26, 2016   #163
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Now the handle feels right and looks better.
I had to find the steel and grind another tool to do it.
Worth
20160826_171207.jpg
Worth1 is offline   Reply With Quote
Old August 27, 2016   #164
matereater
Tomatovillian™
 
matereater's Avatar
 
Join Date: Jul 2006
Location: S.E. Michigan (Livonia)
Posts: 1,264
Default

I like the new version much better, looks like it would be easier to hang onto. nice work !!
__________________
Steve

Cleverly disguised as a responsible adult
matereater is offline   Reply With Quote
Old September 1, 2016   #165
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by matereater View Post
I like the new version much better, looks like it would be easier to hang onto. nice work !!

Thank you Steve it is already coming in handy.
Another scrap piece has a center drill hole in it and I use it to place on the pointed end of the tapered lathe centers to tap them into place.
I have yet to see anyone use something like this on pointed lathe centers.
They normally hit it with a lead or brass hammer and it destroys the hammer face.
20160901_130006.jpg
Worth1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:54 PM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★