Member discussion regarding the methods, varieties and merits of growing tomatoes.
|
|
Thread Tools | Display Modes |
April 29, 2018 | #16 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
Pre-soaking... how long?
Nan |
April 29, 2018 | #17 |
Tomatovillian™
Join Date: Oct 2012
Location: Vancouver Island
Posts: 5,922
|
|
April 29, 2018 | #18 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
Not necessarily old, just to prevent helmets.
Nan |
April 29, 2018 | #19 |
Tomatovillian™
Join Date: Oct 2012
Location: Vancouver Island
Posts: 5,922
|
If the seed is fresh then should be no need. Try planting the seed a bit deeper in moist mix. The seed coat should come off on the way out of the soil. Too shallow, too dry = more than normal share of seeds emerging with their seed coats still on. I personally have a theory, untested, that heat mats can contribute to the problem by making the seedlings pop up so fast there is no time for the seed coat to soften thouroughly. Tomato seeds sprout very well without bottom heat.
KarenO |
April 29, 2018 | #20 |
Tomatovillian™
Join Date: Jan 2012
Location: Connecticut
Posts: 1,460
|
Well, I seem to be getting more of them as my seed gets older. I had more stubborn ones this year than I ever had before. I just transplanted 50 seedlings into solo cups today and found some with a set of true leaves and the cotyledons were still fused by a helmet head underneath the true leaves. So, even if they never come apart, they will still produce true leaves. I seperated them anyway, but I wasn't worried about damaging the cotyledons anymore since they also had true leaves. Makes it easier when you aren't as worried about it, lol.
|
April 30, 2018 | #21 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
Thanks for the hope of a good outcome, Sue!
Nan |
May 4, 2018 | #22 |
Tomatovillian™
Join Date: Jul 2013
Location: SE PA
Posts: 963
|
Good thread. Cotton balls, spit, depth, and heat mats. It makes a lot of sense.
I call it stuck seed coat. |
May 4, 2018 | #23 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
The Ramallet Ibiza Blanca I removed the helmet of, is still hanging in there. The cots don't look normal but have expanded a bit. Best of all, a second Ibiza Blanca sprouted --but with a helmet head, of course.
Nan |
May 30, 2018 | #24 |
Tomatovillian™
Join Date: Jun 2016
Location: 7B
Posts: 281
|
The helmet heads eventually found a will to grow. Planted one in container, and one in ground. I kept a 3rd one as a backup, in the container, planted on the very edge of the pot. It outgrew and dwarfed 2X the one in the ground. Seeing as it was so healthy, I found a planting spot for a 3rd one.
|
May 30, 2018 | #25 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
I had to do major surgery on 2 helmets this year, same species (Ramallet Ibiza Blanca). Both struggled for a long time. One lived and is finally becoming robust after months; the other died.
Nan |
June 1, 2018 | #26 |
Tomatovillian™
Join Date: Feb 2006
Location: MA
Posts: 4,959
|
6 year old seed is where I start seeing helmet heads.
|
June 6, 2018 | #27 |
Tomatovillian™
Join Date: Feb 2006
Location: Northern California
Posts: 300
|
I ended up with "beheaded" seedlings from Yellow Cookie and Brown Berry, both "packed for 2018." In each case the seed sprouted and came up as a stump -- the cotyledon and its coat buried in the planting mix. I used Jiffy peat pellets and maybe they weren't as friable a medium as they should have been.
Yellow Cookie planted in loose planting mix still came up as a "helmet head" and I will be patient with this little one. I've read here that spit will loosen the seed coat. I wonder if glycerine would work also? The weirdest "helmet head" seedling was one from Cornue des Andes (planted in a Jiffy peat pellet). The seedling looked like a little green worm and was growing sideways rather than up. Upon closer inspection I noticed that in the effort to grow (I hadn't touched it) the seed head had split from the rooted portion, so the plant was now composed of a blind stump and a "helmet head" seedling broken off. HOWEVER the seedling, in its struggle, had managed to send forth a tiny root. I took this "helmet head" half, gently liberated it from its seed coat, and planted it in loose mix with some dianthus starts. Now its little compacted cotyledons are beginning to unfurl and its stem is starting to straighten out. I hope it makes it. |
June 6, 2018 | #28 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
Wow, that is one seedling with a powerful will to live!
Nan |
June 6, 2018 | #29 |
Tomatovillian™
Join Date: May 2016
Location: Western Tn.
Posts: 39
|
This has been an interesting thread for me. I've always started my seeds in the 9 oz. size Solo cups and have never had a helmet head. I had plenty of seeds left from my Mule Teams so I tried a little experiment. I planted 6 cups of 3 seeds each in the little 2 oz. cups, 3/4 full and placed them on a heat mat. I got 18 helmet head plants. I don't know what it proves but I know I'll stick to my bigger cups from now on.
|
June 6, 2018 | #30 |
Tomatovillian™
Join Date: Dec 2016
Location: Pittsburgh, PA
Posts: 3,194
|
Groundhog, how deep do you plant your seed? And do you think you planted them the same depth in the 9 oz & 2 oz cups?
Nan |
|
|