Tomatoville® Gardening Forums


Notices

General discussion regarding the techniques and methods used to successfully grow tomato plants in containers.

Reply
 
Thread Tools Display Modes
Old May 9, 2018   #1
nniemiec
Tomatovillian™
 
Join Date: Apr 2016
Location: chicago
Posts: 48
Default Netafim irrigation spikes - leaky barbs?

I think some of you guys use this particular system -i installed it to poly tubing using the supplied barbs & I have all kinds of leaks at the barb / poly tube ★★★★★★★★ despite using reduced water pressure compensation.

Any advice on how to minimize the leakage? I feel like a lot of water is leaking despite using a 5/32 in. drill bit (which is smaller vs. the supplied punch) still leaks?
nniemiec is offline   Reply With Quote
Old May 9, 2018   #2
AKmark
Tomatovillian™
 
Join Date: Jun 2013
Location: Wasilla Alaska
Posts: 2,010
Default

Not sure why yours leak, I have a bunch going and have no leaks. Is your pressure over 35psi? If it is you need a pressure regulator.
AKmark is offline   Reply With Quote
Old May 10, 2018   #3
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I have never had leaks using another brand but they are all about the same and I have always used the tool to make the holes.
You my have a bad reduced pressure valve assembly.
These cheaper regulators aren't what you would call the cats meow when it comes to quality.
The only way to check it is with a gauge.
Worth1 is offline   Reply With Quote
Old May 10, 2018   #4
nniemiec
Tomatovillian™
 
Join Date: Apr 2016
Location: chicago
Posts: 48
Default

upon further reflection - i think i'll be fine if I simply drill smaller holes for the pilot - 1/16" should do it vs. the 5/16" that I drilled the first (leaky) time.
nniemiec is offline   Reply With Quote
Old May 10, 2018   #5
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by nniemiec View Post
upon further reflection - i think i'll be fine if I simply drill smaller holes for the pilot - 1/16" should do it vs. the 5/16" that I drilled the first (leaky) time.
5/16 is way too big and 1/16 is way too small try 1/8 one website said 3/16.

Worth
Worth1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:19 PM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★