Have a great invention to help with gardening? Are you the self-reliant type that prefers Building It Yourself vs. buying it? Share and discuss your ideas and projects with other members.
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Tomatovillian™
Join Date: May 2007
Location: SoCal - Zone 10
Posts: 106
|
![]() ![]() Home Depot sells 5x150' rolls of 6" concrete mesh for $120. Using 13 squares (6.5') per cage, one roll of mesh will make 23 cages. The full roll is heavy – 150lbs – so use a dolly or a friend to help you move it. ![]() The ends are bent inward to keep the roll closed. ![]() A-clamps or a helper will keep the roll from springing open when the ends are straightened out. ![]() ![]() Get some good pliers to unbend and open the roll. The bigger and better the pliers, the less pain and soreness will be required. ![]() Wood, bricks or container plants can be used to manage the roll and keep it from getting away from you. (It wants to unwind more than you may want it to...) ![]() Count out the number of 6" squares for the size cage you want – I used 13 squares – and cut each horizontal wire tightly against the 5' vertical wire. That'll make all the ends the same length and give you a clean vertical wire at the beginning of the next 6.5' length. ![]() You can use the pliers to bend the ends – but I had a nut driver with a hole drilled about an inch or so up into the shaft. The fixed depth of the hollow gave me consistent length bends without having to measure. ![]() Nut driver handle gave good leverage and straight, tidy bends. ![]() ![]() Bent ends form hooks that grab the vertical wire at the other end once rolled. ![]() ![]() Overlapping the ends by one 6" square keeps the cage round and gives you something to hold onto when hooking all the ends in place. ![]() ![]() The cage should hold itself together without additional fasteners or welding. I used wire-ties to prevent any surprise movement or dismemberment that might occur once the cage is weighted down with tomatoes. |
![]() |
![]() |
|
|