ok, each end wall was done individually. I attached the film to the bottom, then we stretched it up, over, and around the hoop, and just temporarily stapled it to the inside of the wood framing.
Once the end walls were done, we attached the film to one skirt board along the side and pulled it over the top. pulled as tight as we could and attached it to the skirt board on that side.
then we went to the ends and pulled the top film over the end walls as tight as we could, trying to get out any wrinkles. then we attached it. everything was attached by using 1 by 2 firing strips and 1-1/2 inch screws.
__________________
Anything in life worth doing is worth over-doing. Moderation is for cowards.
|