Tomatoville® Gardening Forums

Tomatoville® Gardening Forums (http://www.tomatoville.com/index.php)
-   Tomato Recipes (http://www.tomatoville.com/forumdisplay.php?f=62)
-   -   Up late to make tomato juice tonight (http://www.tomatoville.com/showthread.php?t=48275)

ContainerTed October 12, 2018 07:57 PM

Up late to make tomato juice tonight
 
Well, I went over to Grainger County and purchased 4 bushels of what they called Beefsteak tomatoes to make my juice. I chopped up 3 bushels and have been making juice all day. I have the first 7 quarts out of the pressure canner and am reducing about 6 gallons of juice at the moment. It is soooo.... good. I didn't have that much out of my garden (at the same time) that would justify trying to make juice. So, I kept some of the juice from all the ones I grew and added the volume of the purchase and ........ Yeah, it's just wonderful.

I started with about 18 gallons of raw juice, and I'm cooking it down a bit more than usual. That's because I usually take out the seeds and then do the juice. With this setup, I've got a bit more watery juice that needs to be reduced.

So, it looks like about 24 to 30 quarts, give or take. Yeah, for those who haven't followed my juice posts before, I like my juice thick. In January and February, I'll be tasting some good stuff. I've said it before, and I'll repeat it again. It's like drinking a summer heirloom in the middle of a winter snow storm.

And, my recipe is just reducing the liquid and then adding canning salt. Nothing else. I've still got one quart from 2016 that will be next on the menu.

Take care, y'all.



Take care

ContainerTed October 12, 2018 10:38 PM

Got 25 quarts out of this first part of the run. I'm tired. Been at this since about 9 o'clock this morning. I'll finish tomorrow.

Yeah, it tastes so danged good.

ginger2778 October 13, 2018 07:52 AM

Ted what do you use to separate out the skins and seeds, and get it fine enough to be drinkable? I might want to try it this year, and I haven't a clue how to start. ( I suppose I could watch a YouTube video):)

ContainerTed October 13, 2018 09:54 AM

Marsha, I am currently using a "Back to Basics" food mill. It is a hand crank type and is almost identical to the Victorio products. BTW, it also does apples for apple sauce and apple butter, etc. Mine cost me $57 about ten years ago. I am currently looking at the attachment for our Kitchen Aid Mixer.

Here's my steps to make my juice.

1. Wash the tomatoes. DUHHHH !!!!

2. Begin cutting the tomatoes and removing seeds. I use the point of my best knife to remove them without too much damage to the locule walls. After the seeds are secured, I cut up the remains of the tomatoes into chunks 1.5-2". I use large plastic bowls to hold the cut up chunks. I do not remove the skins.

3. I crank all the tomatoes thru the BTB mill which removes the skins and remaining seeds. I run everything thru at least twice to get all the juice and "meat" possible. The skins are usually so devoid of any meat that I can do a skin color check.

4. The juice goes into a large 12 quart pot on the stove where it is brought up to a gently rolling boil. Actually, you can't really call it a boil because the juice "rolls" but there are no bubbles. I stir with a large spoon every now and then and check the bottom for any sticking.

5. Now begins the reduction phase. You know you have the setup right when the contents of the pot are rolling without bubbles and the steam is rising off the surface. So, this is stir every now and then, and wait time. It is also tasting time and this is where, as it thickens, I add canning salt and perhaps a bit of sugar if the tomatoes had been on the tart side. It's important to wait till late in the reduction phase to add the salt. This assures the ratio of salt to juice is no more than 1 teaspoon per quart. When I have reduced it enough, I put it into jars and pressure can it.

I keep the freshly canned jars on the kitchen counter for about 48 hours to make sure the seals are good. I can reprocess any that fail. I've only had one fail ever. It was an almost undetectable irregularity in the rim of the jar. Then they are stored on shelves at normal room temp until needed. I like my juice cold, so mine will go into the fridge just before consumption.

I'm going to finish off the final bushel today. I'll take a few pictures and post them here.

Worth1 October 13, 2018 12:12 PM

I wonder if this stuff would make some sort of good hooch.

Worth

ContainerTed October 13, 2018 01:28 PM

It makes a great wine, but you might have to add some sugar to get a higher alcohol content.

Salsacharley October 13, 2018 02:40 PM

I bet your juice has some healing properties, especially spiritually.

Worth1 October 13, 2018 02:45 PM

My job as a wee thing was to stand on a chair and stir the stuff in a big granite ware kettle so it wouldn't stick.:lol:

ContainerTed October 13, 2018 04:19 PM

Here's the pictures to go with the post above
 
8 Attachment(s)
Okay, here's the rig I use. I mount the BTB mill on one of our old cutting boards. I add in a small block of wood to raise it up to fit the height of my bowls. I also use a couple of clamps to hold everything together as one unit over the double sink.

[ATTACH]84558[/ATTACH]

This is the hopper where you put the tomato chunks. The hole is the driver for how large or small the chunks should be.

[ATTACH]84559[/ATTACH]

Here's how I have my chunks before they go into the hopper. Staging them this way allows me to do a lot of cutting up before I have to squeeze out the juice.

[ATTACH]84560[/ATTACH]

This blue (cheap) spoon is one that I use a lot. It moves the chunks to the hopper. And it also is my primary stirring instrument. By moving it sideways in the reduction pot, I can create a better stirring turbulence in the deep pot.

[ATTACH]84561[/ATTACH]

When everything is operating, this is the view of the process. The skins and seeds go out the left and the good stuff comes into the collection bowl.

[ATTACH]84562[/ATTACH]

Skins and seeds will be run at least a second time to make sure no meat or juice is missed.

[ATTACH]84563[/ATTACH]

If you want to recover seeds from this process, you must have all the tomatoes to be of the same variety. Otherwise, you'll have no way of knowing which seed is what variety. The BTB mill will get all the meat. The skins are so clean that you can easily tell if the skin is yellow or pink.

[ATTACH]84564[/ATTACH]

However, if you do only one variety, when you get done cranking, you can add water to the waste of skins and seeds and by pouring off the skins, the seeds are left and I have not found any problem with viability.

[ATTACH]84565[/ATTACH]

That's it. Now the juice is reduced and it goes into jars and is canned. I always take the pressure up to 15-18 PSI for about 5 minutes in addition to the normal recommended canning times. This gives me reassurance that I've covered all the bad accidental possibilities in my sterilization processes.

Cheers, Y'all.

biscuitridge October 13, 2018 09:35 PM

I would hesitate to use that unit because it's made out of aluminum, and aluminum reacts with the acid in the tomatoes, so you'll be getting a dose of aluminum which is a contributing factor in Alzheimer's. I had the same unit, it works great,but I don't want the aluminum in my food so I made one just like it out of stainless steel and added a motor, it makes momma happy. Cabelas sells an attachment for their meat grinders that is made out of porcelain covered cast iron I think, it's a very nice unit,and makes great applesauce as well, 2 weeks ago we got together with some friends and made and canned over a thousand quarts of applesauce and pressed about 300 gal of cider. We used the Cabelas units for the sauce,and my bladder press for the cider.

Worth1 October 13, 2018 11:31 PM

[QUOTE=biscuitridge;717001]I would hesitate to use that unit because it's made out of aluminum, and aluminum reacts with the acid in the tomatoes, so you'll be getting a dose of aluminum which is a contributing factor in Alzheimer's. I had the same unit, it works great,but I don't want the aluminum in my food so I made one just like it out of stainless steel and added a motor, it makes momma happy. Cabelas sells an attachment for their meat grinders that is made out of porcelain covered cast iron I think, it's a very nice unit,and makes great applesauce as well, 2 weeks ago we got together with some friends and made and canned over a thousand quarts of applesauce and pressed about 300 gal of cider. We used the Cabelas units for the sauce,and my bladder press for the cider.[/QUOTE]


I'm not saying you are wrong but if you do you might consider not eating out in restaurants because many of them use aluminum kettles. :)

biscuitridge October 13, 2018 11:37 PM

You are right,that's exactly why I don't eat out at restaurants, why should I when I have all the organic produce that I need right in my garden. I know most people aren't that fortunate to have the space and time to grow most of their own food,anyway it's just a heads up in case anyone is interested. Not trying to put a damper on anyone's fun.

ginger2778 October 14, 2018 07:05 AM

[QUOTE=ContainerTed;716981]Okay, here's the rig I use. I mount the BTB mill on one of our old cutting boards. I add in a small block of wood to raise it up to fit the height of my bowls. I also use a couple of clamps to hold everything together as one unit over the double sink.

[ATTACH]84558[/ATTACH]

This is the hopper where you put the tomato chunks. The hole is the driver for how large or small the chunks should be.

[ATTACH]84559[/ATTACH]

Here's how I have my chunks before they go into the hopper. Staging them this way allows me to do a lot of cutting up before I have to squeeze out the juice.

[ATTACH]84560[/ATTACH]

This blue (cheap) spoon is one that I use a lot. It moves the chunks to the hopper. And it also is my primary stirring instrument. By moving it sideways in the reduction pot, I can create a better stirring turbulence in the deep pot.

[ATTACH]84561[/ATTACH]

When everything is operating, this is the view of the process. The skins and seeds go out the left and the good stuff comes into the collection bowl.

[ATTACH]84562[/ATTACH]

Skins and seeds will be run at least a second time to make sure no meat or juice is missed.

[ATTACH]84563[/ATTACH]

If you want to recover seeds from this process, you must have all the tomatoes to be of the same variety. Otherwise, you'll have no way of knowing which seed is what variety. The BTB mill will get all the meat. The skins are so clean that you can easily tell if the skin is yellow or pink.

[ATTACH]84564[/ATTACH]

However, if you do only one variety, when you get done cranking, you can add water to the waste of skins and seeds and by pouring off the skins, the seeds are left and I have not found any problem with viability.

[ATTACH]84565[/ATTACH]

That's it. Now the juice is reduced and it goes into jars and is canned. I always take the pressure up to 15-18 PSI for about 5 minutes in addition to the normal recommended canning times. This gives me reassurance that I've covered all the bad accidental possibilities in my sterilization processes.

Cheers, Y'all.[/QUOTE]

Ted this thread is a lot of work for you to post but I am thanking you so much. The explanations are detailed, the pictorial makes your technique so easy to follow. I am doing a bit if online searching for the processor, I will get seriously into it in November, because this is crunch time for me. (I have about 500 beautiful seedling plants that were pre ordered for sale, and another 300 for my annual Swap next Saturday.)
I am saving this thread to my favorites, again so many thanks.😍

ContainerTed October 14, 2018 09:55 AM

Marsha, I'm looking to buy the Kitchen Aid accessory simply to have the motorized version. It works with the meat grinder attachment, which I already have. I'm told that a few parts change out to get the tomato/apple/whatever milling function. You might consider this. I intend to have mine for next season, but I'm also considering getting it now (before prices go up again) to do some apple sauce and a jar or two of apple butter.

Apple butter is so easy to make and tastes so good on those morning when you want some to go on your toast.

Dang it. Now I've done gone and got myself watering at the mouth.

Take care

Father'sDaughter October 14, 2018 10:55 AM

Up late to make tomato juice tonight
 
Ted, thanks for sharing your "how to." If you do buy the attachment this year and use it for apples, please let us know how it goes.

I bought it last year and it's been fantastic for tomatoes as long as I cut them into a size that easily fits into the chute. You're already doing that with yours, so you won't have a problem.

I just ran a bunch of dwarf pastes through it yesterday and I'm still surprised with how much easier it is to set up and run. Once they were cut up, the machine was set up, this bowl of dwarfs plus the smaller bowl of other pastes was run through, the peels run through twice, the purée was on the stove cooking down, and the machine was disassembled and in the sink in less than half an hour. I can actually use my 8 quart pot under it to catch the juice which is a big plus. And clean up time is about the same as with the Vittorio.

I haven't had a chance to try it with anything else yet, but apples would be at the top of the list.

[IMG]https://uploads.tapatalk-cdn.com/20181014/3ee755a74c5793d87f2c59c5da44c61a.jpg[/IMG]

[IMG]https://uploads.tapatalk-cdn.com/20181014/e608b855b16793584def50317b0305b7.jpg[/IMG]


All times are GMT -4. The time now is 11:37 PM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★